Start with the space between the pavers
Choosing pavers is only part of choosing materials for a patio, walkway or driveway. The material between them deserves attention, too. Polymeric sand is a joint-filling material; Patio Supply’s PolySweep listing describes it as sand that hardens when wetted to help with erosion, weeds and insects.
Before buying, focus on a few practical questions: Which sand matches your paving material? Does it suit the joint width and depth? What conditions and application steps does it require? Use the PolySweep details below as a starting point, then ask the Patio Supply team to confirm the specifics for the product you plan to use.
What polymeric sand does
SEK-Surebond describes regular PolySweep and X-Treme Wide Joint PolySweep as blends of sand and polymer binders. Once activated, those binders allow the joints to expand and contract with heat, cold and freeze/thaw cycles. The manufacturer says both products remain flexible to resist cracking.
The manufacturer also states that both products prevent joint-sand erosion caused by rain and other runoff, deter weed growth and insect infestation, and reduce overall pavement maintenance. Read those benefits carefully: deterring weeds is not a promise of a weed-free patio, and reduced maintenance is not the same as no maintenance. Keep expectations tied to the manufacturer’s wording rather than treating joint sand as a cure-all.
Match the sand to the joints
Joint width is a specific product-selection question. SEK-Surebond recommends regular PolySweep for joints up to 3/4 inch, with 1 inch acceptable where pavers intersect. Its X-Treme Wide Joint formula is listed for joints from 1/8 inch to 4 inches. Do not assume that every bag labeled polymeric sand has the same limits.
Depth matters as well. The manufacturer’s product overview recommends a minimum depth of 1.5 inches for best performance with both formulas. Its installation section gives a different minimum for X-Treme Wide Joint. Before choosing that formula, ask the team to confirm the applicable depth requirement using the current product instructions.
SEK-Surebond lists uses with concrete and clay pavers, natural stone, cast stone and porcelain tile. Tell the team which surface you have rather than relying only on the general description of a patio or walkway.
Understand the application before committing
PolySweep’s instructions require completely dry pavement joints and surfaces before installation, with no rain forecast for at least 12 hours afterward. These are buying considerations as well as application details: review the required conditions before deciding when to tackle the work.
The instructions include sweeping sand into the joints, consolidating it with equipment appropriate to the paving material, adding sand as needed, and removing excess material from the surface. Water is then applied in controlled stages. SEK-Surebond cautions against adding too much water too quickly, which can flood the pavement or erode sand from the joints.
This is not a complete installation guide. Ask for the full current instructions, including temperature requirements, equipment, watering and protective gear. The manufacturer specifies protective eyewear and a respirator. Understanding those requirements before purchasing is more useful than discovering them after opening a bag.
Questions to bring to the showroom
Bring your paving-material information and joint measurements, along with questions about the result you want. Patio Supply’s catalog lists PolySweep Tan and notes a platinum option, both in 50-pound bags. Confirm product and color specifics with the team; a catalog listing is not a statement of current stock.
- Which formula is appropriate for my paving material, joint widths and joint depth?
- Which current instructions apply, particularly if I am considering X-Treme Wide Joint?
- What measurements do you need to help determine how much material to buy?
- Can we review the color choice? SEK-Surebond notes that actual color can vary with aggregates, moisture and screen representation.
- What surface preparation, equipment, weather conditions and watering steps should I plan for?
Get product-specific guidance at Patio Supply
Patio Supply supplies materials and offers design assistance for homeowners, with contractors welcome. Visit the single showroom at 9125 State Route 48, Dayton, OH 45458, or call 937-885-1948 to discuss polymeric sand. Start with the joints you need to fill, and ask the team to confirm the product details before you buy.

